Universal Top Support Brackets

Shaped from 13-gauge steel, the universal Top Support Bracket is designed to support Counter Caps.

Peninsula Work Surface Leg

All steel construction, easily adjusts up to 4.25" to desired height.  Easy to install and compatible with any Work Surface, leg has a 6" square mounting plate.

Double Peninsula Work Surface Leg

Double Peninsula Leg with cross bars combines  a designer look with quality and value.  All steel construction compatible with any Work Surface Leg has a 6" x  20" rectangular mounting plate.

9" Universal Cantilever

Stamped 14-gauge steel, 9" long cantilever works on all systems with 1" or 1.5" centered Hanger Frame.  Can be used to hang Wood Shelves or Work Surfaces that do not exceed 12"-15" in depth.

Universal Cantilever

Stamped 13-gauge steel, 23" long , works on all major office systems using 1" centered Hanger Frame.
Safety Note:  Recommends the installation of retaining screws into Hanger Frame directly above top tang Hanger Clip to further reduce the likelihood of Work Surface collapse.

Shared Universal Cantilever

Stamped 13-guage steel, 23" ;long Cantilever works on all major O.E.M. systems using 1" centered Hanger Frame.  Used to support two adjoining Work Surfaces with a single Cantilever.

Tubular Sled Base

1" high-strength tubular constructed Base for use with upholstered Shell.  Available in black only.

Stackable Base

7/16" diameter wire constructed Base rests on sculptured nylon glides.  Available in black powder paint finish.  For use with upholstered Shell.  Please call for ordering information.

GSA Advantage Pricing Available!
Government Credit Cards Accepted

Interface Plate

1/8" Steel
12" Square
Must be modified (drilled) by Purchaser
Used for mounting controls to pre-drilled chair seat pans

"J" Back Upright Hinge

Chair Bases

This reinforced nylon Base with metal hub liner passes all applicable ANSI/BIFMA standard.  It is available in 45mm or 50mm tapered column hub to accept a variety of Gas Lifts.  A large 25" diameter 5-Leg Base assures stability for most office chairs.  Casters are included with bases.

click image for diagram

Casters
Casters are available in a variety of types and styles to fit almost every chair or other furniture use.  Illustrated below is just a sample of casters available.

These 50mm (2") Casters surpass ANSI/BIFMA Standards and are made from the highest quality impact resistant nylon.  Each Caster comes standard with a 7/16" x 7/8" brass grip ring Stem.  Other stems available upon request.

2" (50mm) Twin Wheel Hooded Barrel (38mm barrel)

2" (50mm) Twin Wheel Hooded

2" (50mm) Twin Wheel

Gas Cylinder Lift

This Gas Cylinder Lift is an ideal replacement for may office chairs.  The top taper is 17-4 (most often used by chair manufacturers) and the Lift provides approximately 5.5" of travel.  Choose 45mm or 55mm standpipe to match base hub taper.

Universal Lift Cover (3 Piece)

Standard 3-piece Cover can work with most task and executive seating applications.
 

Universal Swivel Chair Control

Sturdy seat plate with gas activation lever.  Stamped 17/4 core.

Universal Wood Seat Pan

Wood Seat Pan is a standard curve seat.  Made of plywood, it has predrilled hole patterns for Universal T-Arm Bracket (U.0116.02.BK).  1/4-20 "T" Nuts required.

Chair Back

Two piece back assembly has inner and outer shells.  Inner-3/8" 5-ply furniture grade plywood, outer-3/16" 3 -ply furniture grade plywood.  Drilled with "T" nut installation.  Hinge attachment (1" x 1 7/16"). "T" nuts accept 1/4-20 bolts.  "T" Nuts not included.

Assembled Chair
Now you can build your own custom chair from a choice of high quality, in stock parts, .  Your chair can be shipped in kit form for upholstery and assembly.  Or, ship us your C. O. M. fabric selection and we wll have your chair(s) upholstered in 5-10 working days.  Choose from the list of options below to create your custom chair and its product number.

Example:

Product Number 3.2112.05.00 is a chair with the following options:

3-Series

2-Swivel Tilt Mechanism

1-25" Poly Base with Casters

1-Mid size ABS Seat with Molded Form

2-Medium Wood Plastic Back with Height Adjustment & Molded Form

05-C" Style Arms with width Adjustment

00-C. O. M. Fabric

Assembled List-$500.00

Kit List-$463.00
 

Home of Wizard Brand Products!

Universal J- Back 1.79" x 13.5"

Flat stock "J' bar with slot and adjustable knob for back height adjustment.  Use with Swivel Chair Control (U.00116.02 BK).

Universal #250 Hinge

The Universal #250 Hinge is spring loaded and connects the J-Back to the Chair Back.

Universal T- Arm Bracket

T-Arm Bracket is used with standard curve seats (U.0124.01 0r U.0109.01).  1/4-20 Bolts not included.  Size dependent upon chair manufacturer.