Welcome to Oodles Of Parts Plus


Solution Provider... View Cart

 

Home FAQ's Shipping Request A Quote Email Us

site# 907

HM Panel Hardware

 

 

 

click for larger image

code 33

Order Top Caps & Panel Glides separately for hard surface panel blanks

Order Top Cap, Panel Glides & Acoustical
Batting separately for acoustic panel blanks.

HM Panel Hardware Kit
Part #Dimension HPaintedUnpaintedQty/Finish
HMU135.3434"$ 44.00$ 40.00
HMU135.4242"   48.00   44.00
HMU135.4848"   53.00   49.00
HMU135.6262"   61.00   55.00
HMU135.8080"   73.00   66.00
Painted Kit Includes: Shell-painted (2), Hanger Frame DT(2), Wedge Block (4), T-Nut (2), Screws for Shell & Hanger Frame, and Screws for Wedge Block (8).Unpainted Kit: Panel Shell is unpainted, all other parts are finished or painted . (see paint finishes)


 

HM Panel Shell and Screw
Part #Dimension HPaintedUnpaintedQty/Finish
HMP135.3434"$ 8.00$ 6.00
HMP135.4242"   8.50   6.50
HMP135.4848"   10.00   7.50
HMP135.6262"   12.00   8.50
HMP135.8080"   14.50   11.00
UNP854.01ZIShell Screw (zinc)      .10 
18-gauge roll formed steel, ready to apply to vertical edges of panel. Two required per panel. Shell Screw is #10-12 x 1 Pan Head Phillips. Approximately twelve required per panel.    (see paint finishes)

code 33

 

HM Panel Hanger Frame
Part #Dimension HDT PriceQty
HMP136.3434"$ 10.00
HMP136.4242"   11.50
HMP136.4848"   12.50
HMP136.6262"   14.50
HMP136.8080"   18.00
16-gauge roll formed steel, ready to apply to vertical edges of panel. Two required per panel. Dark Tone (DT) color only.


 

HM Panel Wedge Block and Screws
Part # (DT) PriceQty
HMP121.00DTWedge Block$ 1.60
HMP853.01ZIWedge Block Screw (zinc)     .20
High quality cast aluminum, electrostatic powder coat finish. Ready to assemble, Four required per panel. Wedge Block Screw is # 14-10 x 2 Flat Head Phillips. Eight required per panel. Dark Tone (DT) color only.


 

HM Panel T-Nut
Part #  PriceQty
HMP112.01ZIPanel T-Nut (zinc)$ .72
3/8-16 x 1" zinc. Two required per panel for Series 1; none required for Series 2. Zinc finish

code 33

 

HM Panel Glides
Part # PriceQty
HMP154.01DTGlide (Series 1)$ 1.60
UNP115.0100Glide Insert Tool  60.00
HMP574.01DTGlide (Series 2)   1.30
Glide (Series 1) is 3/8"-16 x 4.5", and Glide (Series 2) is 3/8"-16 x 1.75" threaded with heavy-duty molded plastic 2" base. Two required per panel.

 

HM Panel Top Cap Plastic
Part #Dimension L PriceQty/Finish
HMP122.088' (96")$ 12.50
Extruded PVC. Center strip is barbed for firm retention. Fits in pre- grooved panel top. Must be cut to panel width,.  (see plastic colors)

 

HM Panel Top Cap Aluminum
Part #Dimension LPaintedUnpaintedQty/Finish
HMP146.0112L (feet) NA$ 36.00
HMP146.1212L (inches)   5.20    2.70
HMP146.2424L   8.00    5.20
HMP146.3030L  11.30    8.00
HMP146.3636L  11.30    8.00
HMP146.4242L  13.50    9.30
HMP146.4848L  16.20   10.50
HMP146.6060L  20.20   13.20
Aluminum Extrusion.    (see paint finishes)


 

HM Panel End Cap Kit Aluminum & Assembled
Part #Dimension HPaintedUnpaintedQty/Finish
HMA128.3434H$24.00$ 19.00
HMA128.4242H   27.00    21.00
HMA128.4848H   30.00    23.50
HMA128.6262H  35.90    29.00
HMA128.8080H  43.70    36.00
Used to finish off end of panel run. Kit includes: Top & Bottom End Cap Blocks (1ea), End Cap Middle (1), Top & Bottom End Cap Bolts (1 ea)    (see paint finishes)


 

HM Panel End Cap  Aluminum
Part #Dimension HPaintedUnpaintedQty/Finish
HMP128.3429H$14.50$ 11.00
HMP128.4237H   18.50   14.00
HMP128.4843H   22.00   16.00
HMP128.6257H   29.00   22.00
HMP128.8075H   38.80    29.00
Aluminum Extrusion designed to be compatible with OEM panel products   (see paint finishes)

 

HM End Cap  Blocks & Bolts Aluminum
Part #PositionPaintedUnpaintedQty/Finish
HMP158.01Top$4.50 ea$ 4.00 ea
HMP158.02Bottom 4.50 ea   4.00 ea

Bolts for aluminum end cap block

HMP855.01BKTop & Bottom 5/16-18 x 2.5".60 ea
Aluminum casting designed to be compatible with OEM  products   (see paint finishes)

 

code 33

HM Panel End Cap Kit Plastic & Assembled
Part #Dimension HDT PriceQty
HMA103.3434"$ 20.70
HMA103.4242"  23.20
HMA103.4848"   26.20
HMA103.6262"   30.20
HMA103.8080"   35.20
Used to finish off end panel run. Kit Includes: Top & Bottom End Cap Blocks (1ea), End Cap Middle (1), Top & Bottom End Cap Bolts (1ea)

 

 

HM Panel End Cap Middle Plastic
Part #Dimension HPriceQty
HMP103.3429H$ 11.50
HMP103.4238H   14.00
HMP103.4843H   17.00
HMP103.6257H   21.00
HMP103.8075H   26.00
Extruded plastic, color throughout, cosmetic use only. Designed to be compatible with OEM panel products 


 

HM End Cap  Blocks & Bolts Plastic
Part #PositionUnpaintedQty
HMP095.01Top$ 4.00 ea
HMP096.02Bottom   4.00 ea
Aluminum casting designed to be compatible with OEM  products  

Standard Paint Finishes

colorcode
Dark ToneDT
Medium ToneMT
InnertoneHT
Light ToneLT
Light NeutralLN
Light Grey *LG
Innertone Light *HF

* not available in plastic

see color chart

Optional Paint Finishes
colorcode
Slate GreySG
Black UmberBU
Soft WhiteLU
 

* Optional paint finishes require additional lead time up charge based on order size

 Used Parts Product List | Product Development | Recycling News | Recycling News 2 | Satisfied Clients | Wizard News Directory Of Services & Posture Fit

Need Help?   E-mail: Problem Solver
Phone or Fax orders accepted...
Phone: 800-286-5471
    Fax: 919-841-4764

  * Prices shown are subject to change without notice.

Credit Cards accepted
 
Note: All charges will be billed under PROBLEM SOLVER
or make checks payable to PROBLEM SOLVER
*Shipping fees-added when Problem Solver processes your order.
A copy of your invoice-including shipping fee(s) will be emailed or faxed to you.

Orders of less than $10 in product will incur a $4.50 Minimum Order Fee.

 Visit Our Sister Sites!
Oodlesofusedparts.com | WizardOfficeChairs.com | BusinessfurnitureShop.com
 

Click to verify BBB accreditation and to see a BBB report.  

Contact US  |   Company Policy   |  Privacy Notice | Site Map

Copyright© Problem Solver 2011