Pencil Insert Tray

Increases storage and functionality to a drawer
Multi- sized compartments for storage
Keeps pens, pencils, erasers, paper clips, ect.  within easy reach
Made of durable polypropylene
Made in the U.S.A.

CPF-815P
Black, $4.48 each

Click Here for Workstation Brackets

Office Workstations-Create a convenient workstation to house printers, fax machines, scanners, or phone systems on just about any wall. Place the station at any height so users can access equipment while sitting or standing. At home, create a bill paying or letter writing area, anywhere there's extra wall space. The compact design is a perfect space-saving solution for many modern homes.

Designed to be compatible with O.E.M. Panel Top Cap and Top Cap, H.0008.XX.  Constructed of heat treated spring steel.

Constructed of heat treated spring steel.  Used to lock HW Side Rail (H.0011.XX.XX) to side of Panel Blank. Two required per panel.  Attach with standard pop rivet.
Note:  To be used only with  HW Panel Blank

High quality aluminum extrusion, designed to clip to side of original O.E.M.  Panel to allow Work Surfaces and other components to be hung from panel system.  Available painted and non- painted.

 

1 7/8" diameter molded plastic base with 3/8 - 16 x 6.5" bolt.  Designed to screw directly into original O.E.M. glide housing.  Use Glide Tool to insert or remove Glide with power drill.

Designed to be compatible with O.E.M.  Group Panels and  Panels and  Panel Blanks.  Constructed of high impact injection molded polycarbonate.

GT- Gray Tone   CH- Charcoal   NT- Neutraltone
SM- Smoke   GR- Graphite   BE- Beige
TA- Taupe   NA- Natural

 

Home of Wizard Brand Products!

High quality slotted aluminum extrusion.  Designed to attach directly to wall surface allowing O.E.M.  compatible components or Work Surfaces to be hung directly from the wall.  Use 3/16" Toggle Bolt Anchor and 3/16" x 3" Flat Phillips Toggle Bolt to fasten Wall Hanger Strip to drywall or other types of wall materials.  Fasteners purchased separately.  Use one Toggle Bolt Anchor and Toggle Bolt per foot.

Fasteners

Used to connect Panels to walls or additional Panels at a 90 degree angle.  HW Panel Hinges (H.0023.01.XX) are needed to assemble Panels to Wall Mounts.
 

GT-Graytone  BT-Browntone  Ch- Charcoal  NT-Neutral  SM Smoke  GR- Graphite  BE-Beige  TA- Taupe UP-Unpainted

Formed from heavy duty steel.  HW Shelves can be used for either flipper cabinet tops or general storage shelves.  HW Shelves are designed to be compatible with O.E.M. Shelf Ends or  HW Shelf Ends, product number H.0006.01.

GT-Graytone  BT-Browntone  Ch- Charcoal  NT-Neutral  SM Smoke  GR- Graphite  BE-Beige  TA- Taupe UP-Unpainted

Can be ordered as a kit, product number H.0084.XX.XX, which includes Shelf and assembled Ends.

HW Shelf Ends are designed to be O.E.M. compatible.  Sturdy and durable thaey are constructed of particle board covered with O.E.M. vinyl and available in the HW finishes listed.  Pre- grooved to accept T- edge.
T-edge must be ordered separately.

GT-Graytone  BT-Browntone  Ch- Charcoal  NT-Neutral  SM Smoke  GR- Graphite  BE-Beige  TA- Taupe UP-Unpainted
 

Home Of Wizard Brand Products!

*  Unassembled kits consist of; one pair of Shelf Ends, T- Edge Hanger Clips, and Screws plus Shelf End Face Screws.
** Assembled kits come ready to install with all parts listed above.

High quality steel Clip to attach Shelf End Panel Hanger Frame or Wall Mounting Strip.  Four clips needed per pair of Shelf Ends
 

12- 24 x .375 Shelf End Face Screw used on the face of HW Shelf Ends, H.0006.01 to attach Shelf End to Metal Shelf of Flipper unit.  Eight screws required per pair of Shelf Ends

Extruded rigid PVC Trim Strip used on back of Shelf End to conceal Shelf End Hanger Clips for a finish look.
HW Available Finishes:
GT- Graytone    SM- Smoke

High quality, cast aluminum construction.  Comes complete with Hanger Clip
GT-Graytone  BT-Browntone  Ch- Charcoal  NT-Neutral  SM Smoke  GR- Graphite  BE-Beige  TA- Taupe UP-Unpainted

Can be ordered as complete kit which includes Retainer and Retainer Clips.
Additional lead time and set-up charge may be required for non stock- finishes.

Standard 13- gauge steel Bracket has to O.E.M. style cantilever to hang on Panel Siderail or Wall Track, Order as left or right handed.

19- gauge galvanized steel Retainer Strip used secure Work Surfaces to the Support Arm

Pan Head Phillips Screw for use with H.0004.01 Retainer Bar.  Use 3 per Retainer Strip.

HW Support Arms can be ordered as a kit which consists of 1 pair of Support Arms , 2 Retainer s and 6 Retainer Screws.  All HW Finishes are available.

HW Support Arm Kits

Stamped 13- gauge steel, 23" long.  Works on all major office systems using 1" centered Hanger Frame.

Safety Note:  Recommends the installation of Retaining Screws into Hanger Frame directly above top of Hanger to further reduce the likelihood of Work Surface collapse.

Stamped 13- gauge steel designed to mount Counter Caps to Panels.

Stamped 13- gauge steel bracket used to mount straight end 0of peninsular Work Surface to Side Rails of Panels or Wall Hanger Strips.

Stamped 13- gauge.  Steel Plate is attached to under sides of adjoining Work Surfaces or Counter Caps for added stability.

13- gauge 3" x 5" steel plate.  Plates are attached to underside of Work Surface or Counter Caps with HM Retainer Screws, product number U.0011.02. Used to add strength where two surfaces join.

Installs flush with Work Surface allowing cable and wire pass through.  Dimension 2" x 4".

Provides multiple power outlets at Work Surface height 6' power cord can be plugged into wall outlet or panel system electrical distribution.  Protected by circuit breaker.