Replacement Chair Mechanism ,Mounting Screws,Hub Liners and More

Heavy Duty Mechanisms

site# C662

Office Swivel Chair Mechanism
If your mechanism looks similar to these, then part #01 475 is a good choice
Our #1 selling mechanism! For Small, Medium and Large Chairs
Complete with 1" threaded post, small #74 bell and washer as shown.
Any other bell desired will be shipped as an "add-on" item not installed.

Style # 01 475...$151.65
Qty :
Size :

Old Style
13-1/2" length mechanism when measured length from hole to hole. The original style mechanism used in many older style 4 leg wood office swivel chairs. Bell is 4-1/16" diameter covering the top of the 4 leg base hub plate. The rails curve outwards at each end, as was the common style.
Front to rear hole length 13-1/2"
Side to side hole width, 6". Threaded post is standard 1" diameter
       Style 010
     Price 169.71
Qty :

Conical Spring Post Mechanism
Post, Bell & Washer are included.
Style# 02483...$131.26
Qty :

Lazy Boy Swivel Chair Mechanism
Virtual replacement for many La-Z-Boy and many other office chairs. Slotted screw holes permit installation width variable between 5-3/4" and 6-1/8". Mechanism is shipped as shown complete with Bell, Washer and 1" threaded Post. Meets industry BIFMA/ANSI testing standards, your assurance of quality. La-Z-Boy with 17-1/2" length measured hole to hole.
Style # 04484...$143.95
Qty :

Click here for Lazy Boy Installations Instructions Click here for Eames Replacement Instructions

Replacement Kitchen, Club, Poker or Eames® (type) Tilter Swivel.
Original equipment mechanism's fit most applications.
#402 Tilter, 5 1/4" x 5 1/4" on centers holing
(Also fit's holing 6-1/4" long)
Heavy duty 10 gauge steel
Weight 6 lbs.
Shaft tapered, 1" diameter x 4 3/4"
Solid steel shaft pressed and welded
Solid steel 1 piece pivot pin
Heavy duty tension spring
Exceeds BIFMA/ANSI longevity and quality testing
Residential and Commercial use
$ 80.00
Qty :

502 Tilter 5-1/4" x 5-1/4" on centers holing
12 gauge steel
Shaft 1" diameter x 4-3/8" long
(welded in place)
Heavy wall pipe (hollow)
Solid steel 1 piece pivot pin
Adjustable tension spring
Residential duty (as in original)
$75.05
Qty :

Fit's 1-5/8" ID pipe-Insert Style #502A. Fit's most 1-3/4" OD pipe
1-21/32" OD Vertical groove Insert Style #502B
Fit's 1-7/8" ID pipe-Insert Style #502C Fit's many 2"-2 1/8" OD pipe
Fit's 2-1/16" ID pipe-Insert Style #503D Fit's many 2-1/4-2 3/8" OD pipe

Bolt to Floor Swivel Chair Bases
Bolt to floor swivel chair bases are chiefly used when a stationary chair is desirable. Idea development, special purpose chair, stool or for use on stationary or portable table base systems.

This particular bolt to the floor swivel chair base has a wide variety of setups which can be used. Originally intended as a Jury chair base.
Automatic self return
Use with any manual mechanism offered. Style #01 475 recommended.
7" and 9-1/4" standard heights, others can be special ordered
Left and right swiveling in degrees of 45 left/right, 60 left /right, 90 left/right.
Heavy duty steel construction
# 515 includes 180Â° Cam
$ 138.75
Qty :

Heavy Duty Intensive Gas Bolt Down Jury base
All 50 mm size and column diameter gas cylinders are accepted. Bolt down plate is 1/4" thick plate steel with 6 bolt holes. No hole in floor necessary for cylinder operation
#517 Base only
$145.89
Qty :

Gas Cylinder Columns
Style
Size
Price
Qty
Exposed height from top of base leg
62A
50mm Black painted steel
$31.50

4.50" to 5.50
62D
50mm Black painted steel
31.50

6" to 6.50"
62E
50mm Black painted steel
31.50

6.750" to 7"
62F
45mm Black painted steel
35.95

3-1/2" exposed
Includes adapter

Includes plastic liner.
Liners not sold separately

Bell Washers
#748" x 2-1/4" dia.
Black
Price: $ $19.95 ea
Qty
#75
4-1/16" dia.
Black
Price:$ 25.95 ea
Qty
#83B
1/8" Thrust washer
Plastic
Price:$ 4.30 ea.
Qty
#84
Thrust washer
Steel
Price: $6.95 ea.
Qty

Mechanism Mounting Screws
Large heads give excellent safety protection against ordinary screw "pull through" problems.
.92 each... (indicate size desired)
Qty : Size :

Gas Cylinder Bearing Kit Style #108...$19.95 includes shipping to anywhere in the continental US
Qty :

Bearing Grease- We recommend this marvelous formula for use on:
Office Seating (gas lifts, chair cylinders and chair control mechanisms)
Bearing Grease

Item# 1241   2oz. Container
Price $11.80 each
Qty :

Originally developed by Dr. Harley Rand in the early 1960's to reduce friction and wear on metal-to -metal parts. It also reduces sound, vibration, is water resistant, and a rust and corrosion preventative!
Filing Systems (File Cabinets, Lateral Files Suspension, Vertical Files Suspension) ...and numerous other uses such as garage doors, desk drawers, keyboard tray suspensions, car door hinges, inside door hinges, sliding doors (when metal-to-metal is involved), gate hinges, window slides (when metal-to-metal is involved), flipper door units, etc.
Although many people believe that WD-40 is a degreaser formula; it is actually a de-lubricant. Using WD-40 on any metal-to-metal surfaces will eventually destroy the contact surfaces with rust and corrosion.
For More Parts

GSA Advantage Pricing Available!
Government Credit Cards Accepted

.92 each... (indicate size desired)Qty: Size:3/4"1"1-1/4"

.92 each... (indicate size desired)
Qty : Size :