Herman Miller Action Office

Herman Miller Action Office Parts IV
Call for Current Pricing
to view dims click on any image

2- Way 120 Connector	Spacer
This connector joins 2 panels or unequal heights at a 120 angle. It has a cable management side cover and an enameled or fabric surface. Part#A1221	This spacer joins 2 panels of equal or unequal heights in a straight line and also compensates for dimensional gain in a panel run. It has 2 cable management side covers and enameled or fabric surfaces. Part#A1260
3-Way 90 connector	3-Way 120 Connector
This connector joins 3 of equal or unequal heights at 90 angels. It has a cable management side cover and enameled or fabric surface. Part#A1230	This connector joins 3 panels of equal or unequal heights at 120 angles. It has a cable management side cover and an enameled surface. Part#A1231
4-Way 90 Connector	Finished End
This connector joins 4 panels of equal or unequal heights at 90 angels and has an enameled surface. It does not require a cable management side cover. Part#A1240	This cover finishes the exposed end of a panel and includes a cable management end cover. The standard finished end has a vinyl surface and the finished end with transaction surface end support has an enameled surface. Part#A1250
Structural Finished End	Finished End, Change of Height Panel/Panel
This cover finishes the exposed end of a pane;. It has an enameled surface and cable management end cover. Part#A1259	This cover finishes the exposed end of a pane; that joins panels of unequal heights. It is 32" long but can be field cut to the appropriate length. Part#A0251
Finished End, Change of Height, Panel/Connector	Stacking Wall Start
This cover finishes the exposed end of a connector the joins panels of unequal heights. It is 46" long but can be field cut the appropriate length. Part#A0259	This assembly extends the height of an existing wall start. It connects a stacking panel at a 90 angle to an architectural wall, column, or panel of equal or greater height. Part#A1216
Stacking 2-Way 90 Connector	Stacking 2-Way120 Connector
This connector attaches to the top of an existing 2-way 90 connector and extends the height of the connector used with a stacking panel(s). It has an enameled or fabric surface. Attachment hardware is included. Part#A1226	This connector attaches to the top of an existing 2-way 120 connector and extends the height of the connector used with a stacking panel(s). It has an enameled or fabric surface. Attachment hardware is included. Part# A1227
Stacking 3-Way 90 Connector	Stacking 3-Way 120 Connector
This connector attaches to the top of an existing 3-way 90 connector and extends the height of the connector used with a stacking panel(s). It has an enameled or fabric surface. Attachment hardware is included. Part#A1236	This connector attaches to the top of an existing 3-way 120 connector and extends the height of the connector used with a stacking panel(s). It has an enameled surface. Attachment hardware is included. Part# A1237
Stacking 4-Way 90 Connector	Stacking T-Connector
This connector attaches to the top of an existing 4-way 90 connector and extends the height of the connector used with stacking panel(s). Attachment hardware is included. Part# A1246	This T-shaped connector joins 2 stacking panels in a straight line. Part#A1214
Stacking L-Connector	Stacking L-Connector, Change of Height or End of Run
This L-shaped connector joins a panel/stacking panel to an equal-height panel in a straight line. It also can connect a stacking panel to a staking wall start of equal height. Part#A1217	This L-shaped connector joins a stacking panel on which it sits when the adjacent panel is in a straight line and its height is equal to or lower than the panel. It also connects a stacking panel to the panel on which it sits at the end of a run. Part# A1218
Stacking L-Connector, Low/High Panel	Stacking Panel-to-Connector Attachment kit
This L-shaped connector joins a panel / stacking panel to a higher-height panel in a straight line. Part# A1219	This kit connects a stacking panel to a spacer or 2-way, 3-way, or 4-way 90 connector. The connector height must be equal to or higher than the combined height of the panel and stacking panel(s). Part#A1293
Stacking Finish End	Stacking Finished End, Change of Height
This cover finishes the exposed end of a panel/stacking panel(s). It has a cable management end cover and an enameled surface. Part# A1256	This cover finishes the exposed end of a panel/stacking panel or stacking panel connected to a panel or stacking panel of unequal height. The finished end has an enameled surface. Part#A1257
2-Way 90 Connector with Wood Top Cap	Spacer with Wood Top Cap
This connector joins 2 panels of equal or unequal heights at a 90 angle. It has an enameled or fabric surface, a veneer top cap, and a cable management side cover. The veneer top cap adds 1" to the connector height. Part# NP259	This spacer joins 2 panels of equal or unequal heights in a straight line and also compensates for dimensional gain in a panel run. It has enameled or fabric surface, a veneer top cap, and 2 cable management side covers. The veneer top cap adds 1" to the spacer height. Part# NP260

Used Parts Product List | Product Development | Recycling News | Recycling News 2 | Satisfied Clients | Wizard News Directory Of Services & Posture Fit
Join Our Mailing List
» JOIN NOW
Need Help? E-mail: Problem Solver
Phone or Fax orders accepted...
Phone: 800-286-5471
Fax: 919-841-4764
* Prices shown are subject to change without notice.

Credit Cards accepted

Note: All charges will be billed under PROBLEM SOLVER
or make checks payable to PROBLEM SOLVER
*Shipping fees-added when Problem Solver processes your order.
A copy of your invoice-including shipping fee(s) will be emailed or faxed to you.

Orders of less than $10 in product will incur a $4.50 Minimum Order Fee.

Visit Our Sister Sites!
Oodlesofusedparts.com | WizardOfficeChairs.com | BusinessfurnitureShop.com

Contact US | Company Policy | Privacy Notice | Site Map