The specifications on our Wizard Model# 6286 Task Chair are that it is intended  for 24hour, 7 day per  week use. This chair is different from traditional office chairs in that it has been manufactured to withstand the rigors of constant use.  This is not merely an 8 hour a day chair. It provides maximum comfortability combined with individual adjustability, while incorporating the ruggedness and reparability to minimize long term costs.

Chair must meet both ANSI/BIFMA standards and GSA Intensive Use Chair Performance tests FNEW 83−269E.

The adjustments  include, but not be limited to, height and tilt adjustment with ability to lock into upright position.  Back of chair reclines in a 2:1 ratio from the bottom of the chair.  The back portion of the chair adjusts from sitting to five (5) different height levels without accessing knobs or controls.  Tilt control (torsion bar), knee tilt Chair control with weight tension  adjustment. Cylinder be certified to 100,000 adjustment cycles and filled to a minimum of 500 Newtons.

 The Chair is equipped with a seven leg steel base to add strength, balance and a 25% increase in the ease of mobility. Seven−leg base must have stabilizer ring at joint for added strength. Casters will be 60mm in diameter and be rated at a minimum of 165 pounds each. (Anti−static Casters may be specified as an option)

Armrests are to be C−loops, ergonomic Imperial or Tuff Pads. ease of mobility. Arms are to be independently adjustable in width and height without tools and removable with a single thumbscrew. Imperial and Tuff Pad armrests will be capable of swinging out of the way to prevent damage when Chair is pushed close to work surface. (Arm type to be be specified at time of purchase)

Construction: Chair frame is to be manufactured of 10−gauge steel.  Chair has minimum amount of foam.  Foam is user replaceable by simply removing the seat cover material.  All components of the Chair attach by screw or Velcro to aid in simplicity of replacement.

Suspension:  The Chair suspension shall be a dynamic membrane suspension made from a high strength "co−extruded" elastomeric  filaments woven together with polyester yarn and bonded and stretched over a defined ergonomic shape. The membrane will distribute the weight equally over the seat  and  the body relax with improved lower body circulation. The blood flow restriction of standard foam and metal spring chair is not acceptable. Suspension is to guaranteed to maintain its shape and resiliency for a minimum of 10 years.

Covers: Chair covers must be able to be removed and replaced without tools in a matter of minutes. Fabric is with "Chair Guard 24/7" technology. Chair Guard 24/7 fabric is a performance fabric that is stain, liquid and bacterial resist  The fabric  withstands 1,000,000 double mesh rub. It must meet fire code standard CA−117. (color to be specified at time of order)