HM Assembly Diagram
 |
Top Cap |
PLASTIC | | Length | Part # | Price | Qty / Color | | 8' | M.0056.01 | $10.50 | | PRE- CUT Metal Top Cap | Panel Size | Part # | Painted Price | Qty /Color | 12" | M.0159.12 | $ 8.00 | | 24" | M.0159.24 | 9.00 | | 30" | M.0159.30 | 10.00 | | 36" | M.0159.36 | 11.00 | | 42" | M.0159.42 | 13.00 | | 48" | M.0159.48 | 14.00 | | 60" | M.0159.60 | 17.00 | | |
| Available in standard finishes of color impregnated, extruded PVC plastic or aluminum. Barbed center strip fits securely into pre-grooved Panel Top. Plastic Cap must be cut to required panel width.
see color chart
|
|
Wall Hanger Strip |
High quality aluminum extrusions with heavy duty 16 gauge steel slotted insert. Designed to attach directly to wall surfaces allowing O.E.M. compatible components or work surfaces to be hung directly from the wall. Use 3/16" Toggler Bolt Anchor and 3/16" x 3" Flat Phillips Toggle Bolt to fasten Wall Hanger Strip to drywall or other types of wall materials. Fasteners purchased separatelySize | Part # | Finish | Price | Qty | 60" | M.0120.60.AL | Aluminum | $29.00 | | 72" | M.0120.72.AL | Aluminum | 35.00 | | 84" | M.0120.84.AL | Aluminum | 39.00 | |
|
| .
Safety Note: recommends one toggler bolt per foot on wall hanger strips. |
Fasteners |
3/16" Toggler Bolt Anchor
U.0085.01.00
Price: $1.70 ea | 3/16" x 3" Flat Phillips Toggler Bolt
U.0086.01.ZI
Price: $1.00 ea |
|
Panel End Cap |
Panel Height | Part # | Painted Price | Qty /Color | 34" | M.0171.34 | $ 31.50 | | 42" | M.0171.42 | 34.50 | | 48" | M.0171.48 | 35.50 | | 57" | M.0171.57 | 36.75 | | 62" | M.0171.62 | 36.75 | | 80" | M.0171.80 | 38.75 | | |
| High quality extruded aluminum consisting of End Cap middle, bolts, top and bottom blocks. Designed to be compatible with O.E.M. parts. 
see color chart below
|
Panel to Post Connector Assembly Parts |
Position | Dims | Part # | Price | Qty | Top | 5/16-18 x 2.5" | U.0013.01 | $ 1.00 | | Bottom | 5/16-18 x 3" | U.0013.02 | 1.00 | | |
| Use to attach HM End Cap Blocks to HM Panel End Caps
 |
| |
2-Way Connector Post Height | Part # | Painted Price | Non - Painted Price | Qty/Color | 34" | M.0059.34 | $ 31.25 | $25.00 | | 42" | M.0059.42 | 38.50 | 27.25 | | 48" | M.0059.48 | 41.75 | 30.25 | | 57" | M.0059.57 | 44.75 | 36.50 | | 62" | M.0059.62 | 47.00 | 39.75 | | 80" | M.0059.80 | 56.25 | 51.00 | |
|
| Heavy duty extruded aluminum. Available painted or non-painted. Comes fully machined and ready to assemble.
 |
| |
3-way Connector Post Height | Part # | Painted Price | UN Painted Price | Qty/Color | 34" | M.0061.34 | $ 42.75 | $36.50 | | 42" | M.0061.42 | 54.00 | 43.75 | | 48" | M.0061.48 | 62.50 | 49.00 | | 57" | M.0061.57 | 67.50 | 54.00 | | 62" | M.0061.62 | 74.75 | 60.25 | | 80" | M.0061.80 | 87.50 | 74.75 | |
|
| Heavy duty extruded aluminum. Available painted or non-painted. Comes fully machined and ready to assemble
|
| |
4-way Connector Post Height | Part # | Painted
Price | UN Painted
Price | Qty/Color | 34" | M.0062.34 | $46.00 | $38.00 | | 42" | M.0062.42 | 58.00 | 47.00 | | 48" | M.0062.48 | 66.00 | 54.00 | | 57" | M.0062.57 | 72.00 | 60.00 | | 62" | M.0062.62 | 82.00 | 68.00 | | 80" | M.0062.80 | 92.00 | 77.00 | | |
| Heavy duty extruded aluminum Comes fully machined and ready to assemble.
 |
| |
Durable injection molded plastic. Fully finished and ready to snap on connector posts. Surfaces are paintable. | 
|
Part # | Description | Painted Price | Qty / Color | M.0063.01 | Two-way 90º | $ 2.00 | | M.0064.01 | Two-way 180º | 3.00 | | M.0065.01 | Three-way 90º | 2.00 | | M.0066.01 | Four-way 90º | 2.00 | | |
|
|
1 /4-20 x 1.5 threaded steel plate. Fits on the inside Connector Post. Threaded to receive Flat-Head Connector Bolt. Used to attach Connector Wedge Block to Connector Post. Two plates required per side of Connector post. Part # | Finish | Price | Qty | M.0067.01 | Zinc | $ .40 | | |
| 
|
| |
HM End Cap Mid Section Part # | Price | Qty/Color | M.0068.34 | $20.00 | | | M.0068.42 | 23.00 | | | M.0068.48 | 24.00 | | | M.0068.57 | 24.50 | | | M.0068.62 | 25.00 | | | M.0068.80 | 27.25 | |
|
| End Cap Mid Section. This is the replacement mid section for AO1, AO2 style end caps. It is a high quality aluminum extrusion for use with the upper and lower end cap blocks (order separately).
Not for use with spring loaded or plastic end caps. When used with the end cap blocks this will replace those end caps.
Threaded extrusion to receive bolts for end cap blocks 
|
| |
4 Foot extruded plastic with radius and self adhesive backing strip. Peel and Stick to connector posts. Cut to size of connector posts. | 
|
Part # | Price | Qty / Color | M.0132.04 | $14.50 | |
|
|
| |
Rigid plastic extrusion with self- adhesive backing strip. Peel and stick to Connector Post. Filler Strip Length | Part # | Finish | Price | Qty | 8' | M.0070.01 | DT | $5.00 | | 57" | M.0070.57 | DT | 3.00 | |
|
| Standard 8 foot length must be cut to Connector Post size. Available in pre-cut 57 inch length for use on 62 inch Connector Post.
 |
| |
Connector Wedge Block Part # | Finish | Price | Qty | M.0069.01 | DT | $2.20 | |
|
| Durable cast aluminum with Dark Tone finish, ready to attach to Connector Post. Two blocks required per side of Connector Post.
 |
| |
Flat Head Connector Bolt| Part # | Finish | Price ea | Qty | U.0012.01 | Zinc | $.10 | | |
| 1/4-20 x .75 Flat Head Phillips. Used to attach Connector Wedge Block to Connector Post, Passes through Connector Wedge Block and Connector Post and screws into Threaded Connector Plate, Use four per side of rigid Connector Post. 
|
|
Connector Bottom Block.Part # | Finish | Price | Qty | M.0216.01 | DT | $4.00 | |
|
| For use with AO1, AO2 and Mirage connectors in the bottom position. One required for each side of the connector. Durable metal casting in DT Finish. Requires threaded plate, bolt and connector post (sold separately).
 |
| |
Socket Head Bolt Part # | Dims | Price | Qty | U.0013.03.BK | 5/16-x 1.5 | $.53 | | |
| Socket Head Bolt is made of sturdy steel. Use two per side, one on the top and one on the bottom. Passes through Connector Draw Block, and screws into HM Connector Wedge Block
 |
| | |
Connector Drawer Block Part # | Finish | Price | Qty | M.0076.01.DT | DT | $2.00 | | |
| Connector Draw blocks are cast of durable aluminum with Dark Tone finish. Use two blocks on each side of Connector Post, top and bottom. Also used at top of Panel to Panel connection.
 |
HM Assembled Connector
These are ready to use assembled connectors. For use with OEM AO1, AO2 Parts |
HM Two-Way 90
 | HM Two-Way 180º |
Size | Part # | Price | Qty / Color / Trim | 34/39" | M.0459.39 | $ 53.00 | | 42/47" | M.0459.47 | 76.00 | | 48/53" | M.0459.53 | 80.00 | | 57/62" | M.0459.62 | 86.00 | | 62/67" | M.0459.67 | 90.00 | | 80/85" | M.0459.85 | 118.00 | |
| Size | Part # | Price | Qty / Color/ Trim | 34/39" | M.0460.39 | $138.00 | | 42/47" | M.0460.47 | 153.00 | | 48/53" | M.0460.53 | 163.00 | | 62/67" | M.0460.67 | 180.00 | | 80/85" | M.0460.85 | 203.00 | |
|
Three-Way Size | Part # | Price | Qty / Color/ Trim | 34/39" | M.0461.39 | $ 78.00 | | 42/47" | M.0461.47 | 81.00 | | 48/53" | M.0461.53 | 87.00 | | 57/62" | M.0461.62 | 95.00 | | 62/67" | M.0461.67 | 108.00 | | 80/85" | M.0461.85 | 135.00 | |
| Four-Way 90º Size | Part # | Price | Qty / Color / Trim | 34/39" | M.0462.39 | $85.00 | | 42/47" | M.0462.47 | 98.00 | | 48/53" | M.0462.53 | 105.00 | | 57/62" | M.0462.62 | 120.00 | | 62/67" | M.0462.67 | 135.00 | | 80/85" | M.0462.85 | 165.00 | |
|
Panel to Panel Connector Assembled Parts
Parts available individually or as a kit, see below. |
Fits Panel Size | Part # | Price | Qty | 34/39" | M.0175.34.00 | $12.25 | | 42/47" | M.0175.42.00 | 13.50 | | 48/53" | M.0175.48.00 | 14.00 | | 57/62" | M.0175.57.00 | 15.25 | | 62/67" | M.0175.62.00 | 16.00 | | 80/85" | M.0175.80.00 | 18.75 | | |
| HM Rod and Block Kits
Quality Steel Socket Head Rod and Block Kit with connector rod, top draw block and bottom connector block. Ready to use. 
|
| |
T-Connector Shell Fits Panel Size | Part # | Painted Price | UN Painted Price | Qty/Color | 34" | M.0161.34 | $ 16.00 | $ 14.00 | | 42" | M.0161.42 | 17.00 | 15.00 | | 48" | M.0161.48 | 18.00 | 16.00 | | 57" | M.0161.57 | 19.00 | 17.00 | | 62" | M.0161.62 | 20.00 | 18.00 | | 80" | M.0161.80 | 22.00 | 20.00 | |
|
| Used to connect Panels to walls or additional Panels at a 90 degree angle. 18-gauge steel shell. One Rod and Block kit used to connect T-Connector to Panel.
 |
| |
T-Connector Blocks Part # | Description | Price ea | Qty | M.0164.01.DT | Top Block | $10.00 | | M.0164.02.DT | Bottom Block | 10.00 | |
|
| Die cast aluminum. Black powder coat finish.
 |
| |
T-Connector Filler Strip Length | Part # | Finish | Price | Qty | 84" | M.0187.84 | DT | $7.00 | | 57" | M.0187.57 | DT | 5.00 | |
|
| Rigid plastic extrusion with self- adhesive backing strip. Peel and stick to T-Connector Post. Standard 84" length and must be cut to size. Available in pre-cut 57" length for use on 62" T-Connector Post.
 |
| |
Panel Shell Fits Panel Height | Part # | Painted Price | Non Painted Price | Qty/Color | 34" | M.0053.34 | $ 9.00 | $ 7.00 | | 42" | M.0053.42 | 10.00 | 8.00 | | 48" | M.0053.48 | 11.00 | 9.00 | | 57" | M.0053.57 | 11.00 | 9.00 | | 62" | M.0053.62 | 12.00 | 10.00 | | 80" | M.0053.80 | 14.00 | 12.00 | |
|
| Formed from durable 18-gauge steel . Available in standard finishes or non-painted. Two panel shells are required per panel and, when purchased finished, they come ready to apply to the vertical edges of either Acoustical or Hard Surface Panels
 |
| |
Hanger Frame Fits Panel Height | Part # | Finish | Price | Qty | 34" | M.0054.34.DT | DT | $12.00 | | 42" | M.0054.42.DT | DT | 13.00 | | 48" | M.0054.48.DT | DT | 14.00 | | 57" | M.0054.57.DT | DT | 15.00 | | 62" | M.0054.62.DT | DT | 16.00 | | 80" | M.0054.80.DT | DT | 20.00 | |
|
| Heavy duty 16-gauge steel. Two Hanger Frames are required per panel. Available in Dark Tone. Ready to apply to the vertical edges of Acoustical Tackable or Hard Surface Panels when painted.
 |
| |
Panel Head Screw #10 -12 x 1 Pan Head Phillips self-tapping wood screw. Part # | Finish | Price | Qty | U.0011.01.ZI | ZINC | $ .10 | |
|
| No pre-drilling required. Approximately 12 required per panel depending on size.
.jpg) |
| |
Panel Wedge Blocks Part # | Finish | Price | Qty | M.0055.01.DT | DT | $ 2.00 | |
|
| Made of high quality cast aluminum with a durable powder coat finish. Four wedge blocks are required per panel.
 |
| |
Wedge Block Screws #14-10 x 2 Flat Head Phillips Screw. Part # | Finish | Price | Qty | U.0010.02.ZI | Zinc | $.20 | |
|
| Self tapping, no pre-drilling required. Two screws are required per wedge block, eight per panel. 
|
| |
Panel Glide Description | Length | Part # | Finish | Price | Qty | Glide | 4.5" | M.0057.01.DT | DT | $2.00 | | Glide | 2.0" | M.0057.02.DT | DT | 2.00 | | Glide Tool | | U.0081.01.00 | | 80.00 | |
|
| 2" heavy duty molded plastic base with 3/8-16 threaded bolt. Can be used with 3/8-16 threaded bolt. Can be used with wire management base. Two required per panel. Use Glide Tool to insert or remove glide.
 |
| |
T NutPart # | Finish | Price | Qty | M.0058.01.ZI | Zinc | $1.00 | |
|
| 3/8-16 x 1" zinc, spiral exterior resists torque-out. Fits securely into pre-drilled and reinforced bottom rail of either Hard Surface or Acoustical Panel Blank. Two required per panel. 
|
| |
Shelf Hanger Clip Length | Part # | Finish | Price | Qty | 10.5" (High) | M.0117.01 | DT | $5.25/pr | | 4.75" (Low) | M.0117.02 | DT | 4.75/pr | |
|
| Made of high quality 13-gauge steel. Used to attach Shelf End to Panel Hanger Frame or Wall Hanger Strip. Two clips needed per pair of Shelf Ends. Attach Clip to Shelf End using HM Hanger Clip Screws. Use two Screws per Hanger Clip.
 |
| |
Hanger Clip Screw #10-12 x 2 Pan Head Phillips Part # | Finish | Price | Qty | U0011.04.ZI | Zinc | $.10 | |
|
| Particle Board Screw used to attach HM Hanger Clip. Four screws needed per Shelf End pair. 
|
| |
Shelf End Face Screw #8-32 x .312 Part # | Finish | Price | Qty | U.0020.03 | Z1 | $.06 | |
|
| Used on the face of HM Shelf Ends, to attach Shelf End to Metal Shelf and to Flipper Unit. Use four Screws per Shelf End, eight per Flipper Unit.
 |
| |
Kit assembles in minutes and is designed to be compatible with O.E.M. shelf Parts which are 15.5 ' high and 12.5" deep. Kit does not include Shelf or Shelf ends which are sold separately. All flipper door kit parts are sold separately. Please call for pricing on individual parts. | Available Finishes: | | DT-Dark Tone
LG-Light Grey
LT-Light Tone
MT-Medium Ton | HF-Inner Tone Light
HT-Inner Tone
LN-Light Neutral
UP-Unpaintedfont> |
Size | Kit Part # | Price | Qty | 24" | M.0084.24 | $ 113.00 | | 30" | M.0084.30 | 121.50 | | 36" | M.0084.36 | 131.00 | | 42" | M.0084.42 | 137.00 | | 48" | M.0084.48 | 143.50 | | 60' | M.0084.60 | 161.00 | |
|
| 
Flipper Cover
Flipper Door
Gear Rack
Gears Gear Shaft
Gear Rack Screw
Door Brackets (L & R)
Bearings
Stop Buttons
Fabric Retainer Strip
Lock Cover
Lock Kit without Hook
Lock Hook
Lock Nuts
|
| |
Shaped from 13-gauge steel, Bracket is used to mount HM Counter Caps to HM Panels. Part # | Finish | Price | Qty | M.0233.01 | BK | $12.90/pr | |
|
| 
|
| |
Extruded plastic available in most HM finishes and designed to work on O.E.M. work surfaces. Will accommodate single and some double lamination. | Available Finishes: | | DT-Dark Tone
LG-Light Grey
LT-Light Tone
MT-Medium Ton | HF-Inner Tone Light
HT-Inner Tone
LN-Light Neutral
UP-Unpainted |
Length | Part # | Price | Qty | 250'/roll | M.0081.01 | $190.00/roll | |
|
*all colors may not be available in per foot lengths. Call to inquire. | 
|
GSA Advantage Pricing Available!
Government Credit Cards Accepted
|
| |
4 compartment Pencil Drawer designed for use with either O.E.M. or Drawer Bearer, Part # Part # | Finish | Description | Price | Qty | U.0159.01.BK | DT | W/steel ball bearing glides | $39.50 | | U.0159.03.BK | DT | W/OEM plastic glides | 30.00 | |
|
| 
Dims: 211/4" wide
16" long front to back
2" deep
|
| |
#8-15 x .75 flat head Phillips Screw. Six Screws needed per pair of Drawer Bearers to install drawer unit. Part # | Finish | Price | Qty | U.0072.01 | Z1 | $.04 | |
|
| 
|
| | |
Heavy Duty steel Shelf can accommodate either High or Low Shelf Ends. Shelves are designed to be compatible with O.E.M. Shelf Ends or HM Shelf Ends, Part # M.0091, M.0089.01 and M.0093.01.
| Available Finishes: | | DT-Dark Tone
LG-Light Grey
LT-Light Tone
MT-Medium Ton | HF-Inner Tone Light
HT-Inner Tone
LN-Light Neutral
UP-Unpaintedfont> |
Shelves can be ordered as a kitSize | Part # | Painted Price | Non Painted Price | Qty/Color | 24 " x 12" | M.0092.24 | $ 34.00 | $ 30.00 | | 30 " x 12" | M.0092.30 | 39.50 | 35.00 | | 36 " x 12" | M.0092.36 | 43.50 | 39.50 | | 42" x 12" | M.0092.42 | 47.00 | 42.00 | | 48 " x 12" | M.0092.48 | 52.50 | 47.50 | | 60 " x 12" | M.0092.60 | 71.00 | 66.00 | |
|
|
Wizard Brand Parts!
|
| |
Heavy Duty steel Shelf has extra deep surface to provide room for filing and storing large items. Compatible with O.E.M. Shelf Ends or Shelf Ends (M.0089.02) | Available Finishes: | | DT-Dark Tone
LG-Light Grey
LT-Light Tone
MT-Medium Ton | HF-Inner Tone Light
HT-Inner Tone
LN-Light Neutral
UP-Unpainted |
*Shelves can be ordered as a kit Size | Part # | Painted Price | Non Painted Price | Qty/Color | 24 " x 12" | M.0131.24 | $76.00 | $65.00 | | 30 " x 12" | M.0131.30 | 85.00 | 73.00 | | 36 " x 12" | M.0131.36 | 101.00 | 88.00 | | 42" x 12" | M.0131.42 | 104.00 | 90.00 | | 48 " x 12" | M.0131.48 | 112.00 | 97.00 | | 60 " x 12" | M.0131.60 | 139.00 | 115.00 | |
|
| 
Wizard Brand Parts!
|
| |
Low Shelf Ends
HM Shelf Ends Kits are designed for O.E.M. AO1 and AO2 Parts. shelf end are ready to hang and includes shelf ace screws. | Available Finishes: | | DT-Dark Tone
LG-Light Grey
LT-Light Tone
MT-Medium Ton | HF-Inner Tone Light
HT-Inner Tone
LN-Light Neutral
UP-Unpainted |
Size | Part # | Series Type | Price | Qty | 7.5" x 12.5" | M.0295.01 | A01 | $60.00/pr | | | 7.5" x 12.5" | M.0196.03 | A02 | 60.00/pr | |
|
| 
|
| |
High Shelf Ends |
Size | Series Type | Part # | Kit Price | Qty | 15.5 " x 12.5" | "A01" | M.0195.01 | $68.00/pr | | 15.5 " x 15.5" | "A01" EDP | M.0197.01 | 82.50/pr | | 15.5 " x 12.5" | "A02" | M.0196.01 | 68.00/pr | | 15.5 " x 15.5" | "A02"EDP | M.0196.02 | 82.50/pr | |
|
|
