Solution Provider... 
|
| |
| ||
Herman Miller Action Office ® Parts VI
Call for Current Pricing
to view dims click on any image
| Voice/Data Cable Channel | Voice/ Data Cable Channel Connector |
 This non-ferrous, top-mounted channel provides shielding of voice/data cables from electrical cables on an Action Office Series 1 or 2 panel. It holds up to 10 25-pair cables. The channel cannot be used for energy distribution.Part # NP227 |  This connection joins 2 voice/data cable channels and provides a continuous cableway between equal-height Action Office Action Office Series 1 or 2 panels.Part # NP234 |
| Voice/ Data Cable Channel End Cap | Cable Port |
 This end cap finishes the exposed end of a voice/data cable channel.Par # NP238 |  This cable port is for filed-modified Action Office or Prospects work surfaces,. It provides a hinged access cover for cable pass throughPart #NP360 |
| Cable/Energy Barrier, Panel | Cable/Energy Barrier, Connector |
 This cable/energy barrier provides a continuous, grounded metal barrier within a powered panel to separate voice/data cables from the baseline electrical harness.Part #A1380 |  This cable/energy barrier provides a continuous, grounded metal barrier at the base of a connector to separate voice/data cables from the baseline electrical harness.Part #A1381 |
| Cable Management Panel Extender | Communication Port Faceplate Reducer |
 This 6"-wide panel extender attaches to a cable form a buildings ceiling to the panel frame. It has a ceiling trim and connecting hardware.Part # A1333 |  This faceplate fits into the communication port cutout of an Action Office Series 2, Prospects, or Ethospace cable management side cover; Action Office Series 2 or Prospects cable management panel face; Ethospace cable access tile upper port; or Passage data cover. It reduces the size of the cutout to fit specific telecommunications outlet/connector faceplatesPart #G1189 |
| Communication Port Faceplate Extender | Zone Distribution Cabinet |
 This faceplate fits into the communication port cutout of an Action Office Series 2, Prospects, or Ethospace cable management side cover; Action Office Series 2 or Prospects cable management panel face ;Ethospace cable access tile upper port; or Resolve data faceplate housing or Passage voice/data outlet. It allows installation of specific cable communication modules without interfering with cable communication distribution capacity.Part # G1189.B |  This 24"-wide x 24" deep storage cabinet holds data cabling and associated electronics. It has 4 removable sides that are secured with an internal latch or key and a 19" wide EIA-standard rack for mounting equipment. The cabinet provides cable access through openings located below each side; cables may also enter or exit the cabinet directly form the floor. It include ties to bundle cables and hardware to attach the cabinet to the floor.Part # G1360 |
| Squared-Edge Rectangular Work Surface | Squared-Edge Rectangular Work Surface with Cable Port |
 This work surface hangs from a panel or wall strips and has a predrilled holes for drawers and suspended pedestals. It is available in 2 depths and 23 widths . The work surface has a laminate top and vinyl edge or a veneer top and edgePar # A2310 |  This work surface hangs form a panel or wall strips. It has a black 18" wide hinged cable port centered at the rear of the work surface for cable pass-through. The surface has predrilled holes for a power center and a laminate top and vinyl edge or a veneer top and edge.Part # A2313 |
| Squared Edge Corner Work Surface | Squared Edge Concave Corner Work Surface |
 This 90° corner worksurface hangs from panels or wall strips. It has a cable access hole and a laminate top and a vinyl edge or a veneer top and edge.Part # A2332 |  This 90° corner worksurface hangs from panels or wall strips. It has a cable access hole and a laminate top and a vinyl edge or a veneer top and edge.Part #A2333 |
| Squared Edge Corner Work Surface with C-Shaped End | Squared Edge Corner Work Surface with Input Platform |
|
|
| Squared Edge Corner Work Surface with Input Platform Cutout | Flex-Edge™ Input Platform |
 This 24" deep work surface hangs from panels or wall strips and abuts 24" deep squared-edge work surfaces. It has a laminate top and a vinyl edge cable access holes and a cutout for a user-adjustable input platform.Part # A2336 |  This adjustable platform attaches to a corner work surface with an input platform count. The platform has a laminate top . A flexible waterfall fort edge supports the users arms during input and writing tasks, and flexible edges at each side provide protection from pinching between the platform and the adjacent work surface when adjusting the height. A curbed edge keeps items from rolling off the back side edges.Part # G7730 |
| Squared Edge 120° Corner Work Surface 90° Ends | Squared Edge 120° Corner Work Surface 120° Ends |
 This 120° corner worksurface hangs from panels and has two 90° ends. It has a laminate top and vinyl edge or a veneer top and edge.Part # A2340 |  This 120° corner worksurface hangs from panels and has two 120° extended ends. The ends fit against 2 return panels connected by a 120° connectors and form a 120° workstation angle. It has a laminate top and vinyl edge or a veneer top and edge.Part # A2341 |
| Squared Edge 120° Corner Work Surface 90° /120Ends | Squared Edge 120° Corner Work Surface Extended 90°End |
 This 120° corner worksurface hangs from panels and has a 90° end on 1 side and a 120° end an the other side.. It has a laminate top and vinyl edge or a veneer top and edge.Part # A2342 |  This 120° corner worksurface hangs from panels and extends on 1 side with 90° end. It has a laminate top and vinyl edge or a veneer top and edge.Part # A2322 |
| Squared Edge 120° Corner Work Surface Extended 120°End | Squared Edge Rectangular Work Surface 120°End |
 This 120° corner worksurface hangs from panels and extends on 1 side with 120° end. It has a laminate top and vinyl edge or a veneer top and edge.Part # A2326 |  This work surface hangs from a panel and has a 120° extended end on the left or right side. The extended end end fits against a return panel that is connected by a 120° connector and forms a 120 ° workstation angle. The work surface has a laminate top and vinyl edge or a veneer top and edge. It also has predrilled holes for a pencil drawer and suspended pedestals.Part # A2316 |
| Squared Edge 120° Link | |
|
Action I | Action II | Action III | Action IV | Action V | Action VI| Action VII | Action VIII
Used Parts Product List | Product Development | Recycling News | Recycling News 2 | Satisfied Clients | Wizard News Directory Of Services & Posture Fit Need Help? E-mail: Problem Solver * Prices shown are subject to change without notice. Credit Cards accepted A copy of your invoice-including shipping fee(s) will be emailed or faxed to you. Orders of less than $10 in product will incur a $4.50 Minimum Order Fee. Oodlesofusedparts.com | WizardOfficeChairs.com | BusinessfurnitureShop.com |
|
| Copyright© Problem Solver 2011 |
This 90° corner worksurface hangs from panels or wall strips. It has a C-shaped end for conferencing The worksurface has a laminate top and a vinyl edge or a veneer top and edge.
This 90° corner worksurface hangs from panels or wall strips. It has a cable access hole and a laminate top and a vinyl edge.
This link connects a 2 120° corner worksurfaces and form a a continuous surface. I has a laminate top and vinyl edge or a veneer top and edge.
